FGS-2824
Nachádzate sa v Všetky kategórie
|
 |
Kategórie produktu
RubyTech » Gigabit Switch » L2 Managed
Parametre
| Frekvenčný prenos | 50 - 20.000 Hz |
| Citlivosť | 87 dB |
| Zaťažiteľnosť | 180 W (2 x 90 W max.) |
| impedancia | 4 Ohmy |
| Šírka | výška: 15 mm |
Popis
FGS-2824
8-Port TP + 16-Port SFP L2 Managed Gigabit Switch
24-port Gigabit L2 Managed Switch is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. The switch included 8-Port 10/100/1000Mbps UTP and 16-Port Gigabit SFP Fiber management Ethernet switch. The switch can be managed through RS-232 serial port via directly connection, or through Ethernet port using CLI or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can login the switch to monitor, configure and control each port's activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful function such as QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON, IGMP Snooping capability and Illegal Access Report via the intelligent software. It is suitable for both metro-LAN and office application.
Note : FGS-2824 only supports the SFP transceiver from the following vendors.
1. Ruby Tech Corporation
2. Avago Technologies
3. Finisar Corporation
Key Features
QoS support layer 4 classification
The switch supports not only Layer 2 802.1p Priority Queue control, but also supports programmable higher layer classification and prioritization to enable enhanced Quality of Service (QoS) support for real time applications base on information taken from Layer 2 to Layer 4, such as VoIP.
Port Mirroring Helps Supervisor Monitoring Network
Port mirroring copies traffic from a specific port to a target port. This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data.
Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. VLAN support enabling advanced techniques such as "802.1Q-in-1Q" to be deployed.
802.3ad LACP for Bandwidth Aggregation
The Gigabit ports can be combined together to create a multi-link load-sharing trunk. Up to 12 Gigabit ports can be set up per trunk for bandwidth up to 24Gbps, all traffic is aggregated based on MAC addresses, thus balancing the traffic load. The switch supports up to 8 trunking groups. Port trunks are useful for switch-to-switch cascading, providing very high full-duplex speeds.
802.1x Access Control Improve Network Security
802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.
802.1d Compatible & 802.1w Rapid Spanning Tree
For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.
Broadcast/Multicast Storm Control
To limit too many broadcast/multicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.
Standard compliance
IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
IEEE 802.3z 1000Base-SX/LX Ethernet
IEEE 802.3x flow control capability
ANSI/IEEE 802.3 auto-negotiation
IEEE 802.1q VLAN
RoHS Compliance
Performance
Switching capacity
l 24 Gigabit Ethernet ports with non-blocking wise speed performance
l 8 K MAC addresses
l 400KB on-chip frame buffer.
l Supports Jumbo frame support, up to 9K
l Broadcast/Multicast Storm Suppression
l Port Mirroring
VSM (Virtual Stacking Management)
l Supports 16 devices stacking
l Multiple switches can be managed via one IP address, just like software stacking
l Low cost and easily to establish network environment, not extra hardware require.
l Not center on the physical location of wiring closets
VLAN
l Port-base VLAN
l IEEE802.1q tag-base VLAN, up to 256 active VLANs
l Q-in-Q is an efficient method for enabling Subscriber Aggregation
Qos
l Supports Layer 4 TCP/UDP Port and ToS Classification
l Supports 802.1p QoS with two level priority queue
l Supports priority in a Q-in-Q tag
Bandwidth Control
l Supports Ingress, Non-unicast and Egress Bandwidth rating management with a resolution of 1Mbps
Protocol
LACP
l Port trunking with 8 trunking group
l Up to 12 ports for each group.
GVRP/GARP
l 802.1q with GVRP/ GARP
Multicasting
l Supports IGMP snooping including active and passive mode
STP/RSTP
l 802.1d/1w
Network Security
802.1x access control
Management Access Policy Control
Snmpv1,v2c Network Management
MIB Files: Interface MIB, Address Translation MIB, Statistics Group 1, History Group 2, Alarm Group 3, Event Group 9, IP MIB, ICMP MIB, TCP MIB, UDP MIB, SNMP MIB, FC 1213 MIB (MIB-II), RFC 1757 RMON MIB, RFC 1493 Bridge MIB, RFC 1643 Ethernet MIB, Enterprise MIB
Technical Specification
LED Description
LED
Color
Function
Global
POWER
Green
Lit when +5V power is coming up
Global
CPU
Green
Blinks when CPU is activity
Port 1-8
LINK/ACT
Green
Lit when connection with remote device is good
Blinks when any traffic is present
Port 1-8
10/100/1000Mbps
Green/Amber
Lit Green when TP link on 1000Mbps speed
Lit Amber when TP link on 100Mbps speed
Off when 10Mbps or no link occur
Port 9-24
LINK/ACT
Green
Lit when SFP connection with remote device is good
Blinks when any traffic is present
Diagnostic LED
Feature
Detailed Description
System LED
POWER CPU
10/100/1000M TP Port Per Port LED
LINK/ACT, 10/100/1000Mbps
Gigabit SFP Module LED
LINK/ACT
Network Interface
Configuration
Connector
Port
10/100/1000Mbps TP Jack (RJ-45)
TP(RJ-45)
1 to 8
1000Mbps SFP Fiber Module
SFP
9 to 24
Hardware Spec.
Feature
Detailed Description
Voltage
100~240 VAC,AC Line
Frequency
50~60 Hz
Consumption
30W
Ambient Temperature
0° to 40°C
Humidity
5% to 90%
Dimensions
44(H) 442(W) 209(D) mm
Weight 3kg
Safety
Comply with FCC Part 15 Class A & CE Mark Approval
Packing Information
Carton Dimensions (mm)
pcs/Carton
N.W (KG)
G.W (KG)
530x512x345
5
20
21
Ordering Information
Model
FGS-2824 8-Port 10/100/1000BASE-T UTP + 16-Port 1000BASE-X (SFP) L2 Managed Gigabit Ethernet Switch
Optional SFP Fiber Module (See note below)
Model
Description
SFP.LC 1000Base-SX GE SFP Multi-Mode Fiber Module 850nm
SFP.LC.S10 1000Base-LX GE SFP Single-Mode 10Km Fiber Module 1310nm
SFP.LC.S30 1000Base-LX GE SFP Single-Mode 30Km Fiber Module 1310nm
SFP.L5.S50 1000Base-LX GE SFP Single-Mode 50Km Fiber Module 1550nm
SFP.BL5.S10
1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1550nm, Type 1
SFP.BL3.S10 1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1310nm, Type 2
SFP.BL5.S20 1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1550nm, Type 1
SFP.BL3.S20
1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1310nm, Type 2
Note: FGS-2824 only supports the SFP transceiver from the following vendors.
1. Ruby Tech Corporation
2. Avago Technologies
3. Finisar Corporation
Galéria
Dotazy k produktu
K produktu ešte nebol pridaný žiadny dotaz
Pre pridanie komentáru musíte byť prihlásený
Naposledy navštívené produkty
 FC/APC Cone type |  FC/PC SM |  FE-C130/130U (USB power) |  FGS-2824 |