EM-C107C

Kód produktu: EM-C107C Cena bez DPH: 71,00 EUR Cena s DPH: 84,49 EUR Záruka: neuvedené Doba expedície: neuvedené Stránka produktu: neuvedené Výrobca: neuvedené Kúpiť: Počet

Kategórie produktu

  RubyTech » Media Converter » Module for CR-16xx

Parametre

Popis

EM-C107C
Fast Ethernet 10/100Base-TX To 100Base-FX (SC/ST) Bridge Converter Module


EM-C107C complies with IEEE802.3/IEEE802.3u 10/100Mbps Fast Ethernet that supports two types of media, 10/100Base-TX and 100Base-FX, for network connection. LFP (Link Fault Pass Through) feature enhances the TP-Fiber Link integrity and conformity.

With modular slide-in design, it is flexible to install in the 19" converter rack (up to 16 units) for use at a central wiring closet. The converter racks CR-16xx and CP-100/200 family are available for housing the converter modules.

　


Key Features

■Link fault pass through (LFP)

(LFP function only takes effect as SW1-Bit2 is enabled. Disabled SW1-Bit2 will turn this media converter into a general one. This media converter supports link fault pass through (LFP) in TX/FX converter application. Link status on one port is propagated to the other port to notice the remote nodes. If TP port is unplugged, this converter stops transmission on fiber port. This causes the remote fiber node link to fail. LED shows the link failure on both TP and fiber ports. If fiber link fails, this converter restarts auto-negotiation on TP port but always stays in the link failure state. This causes the remote TP node link to fail. LED also shows the link failure on both TP and fiber ports.)

■RoHS Compliance

　


Technical Specification



■Standards：IEEE 802.3u,10/100Base-TX,100Base-FX

■Cable：
■UTP Cable：Cat. 5 cable and up to 100m
■Fiber (Multi Mode)：50/125, 62.5/125, 100/140μm
■Fiber (Single Mode)：8.3/125, 8.7/125, 9/125, 10/125μm

■Data Transfer Rate：
■100Mbps: 148,800 PPS
■10Mbps: 14,880 PPS

■LED Indicators：
PWR： Lit when +5V power is coming up
TP LNK： Lit when TP connection is good
Blinks when TP data is present
TP 100： Lit when TP speed is 100Mbpso:p>
Off when TP speed is 10Mbps
FX LNK： Lit when fiber connection is good
Blinks when fiber data is present
FX 100： Lit for fiber 100Mbps operation
FDX/COL：

Lit when full-duplex mode is active
Off when half-duplex is active
Blinks when collision is present

■Power Requirement：2A@+5VDC

■Ambient Temperature：0~50°C

■Humidity：5~90%

■PCB Dimensions：125(L) x 64(H)mm

■Emission：FCC Part 15 Class A, CE Mark


Note：For connecting this device to Router, Bridge or Switch, please refer to the corresponding device's Technical Manual.

Ordering Information

■Model
EM-C107CSC SC Multi-Mode Module
EM-C107CST ST Multi-Mode Module
EM-C107CSC.S05 SC Single-Mode 5KM Module
EM-C107CSC.S20 SC Single-Mode 20KM Module
EM-C107CSC.S40 SC Single-Mode 40KM Module
EM-C107CSC.S60 SC Single-Mode 60KM Module
EM-C107CSC.S80 SC Single-Mode 80KM Module
EM-C107CSC.SA0 SC Single-Mode 100KM Module

Galéria

Dotazy k produktu

K produktu ešte nebol pridaný žiadny dotaz

Pre pridanie komentáru musíte byť prihlásený

Naposledy navštívené produkty

E2000/APC SM

E2000/PC SM

EM-C106

EM-C107C